Placeholder Lighted "X" Runway Closure Marker - Skip to content

Lighted "X" Runway Closure Marker

Original price $25,000.00 - Original price $25,000.00
Original price
$25,000.00 - $25,000.00
Current price $25,000.00
Vendor: OTWSafety

Diesel Generator - 5 Min. Setup - LED Light Fixtures

The Lighted X Runway Closure Marker is a lighted visual aid for indicating to airplane pilots that an airport runway is closed. Designed and certified in accordance with FAA requirements, its flashing lights can be seen both day and night from miles away, clearly discernible as a giant “X” and distinguishable from other lighted visual devices used at airports, signifying that the runway is not open for landings. The Lighted X trailer is easy to transport, and can be deployed by one person in less than five minutes.

The “X” shape comprises nine lights on four independent arms and a mast. When deployed, the mast tilts upward to nearly vertical, and the “X” is centered at the top of the mast. For transport and storage, the mast tilts downward and the arms pivot together. The entire assembly lies flat when stowed, held in place by support brackets and lock-pins.

Each arm includes two high-efficiency LED light fixtures, with one additional light fixture located at the center of the “X.” LEDs provide highly directional light distribution, resulting in high luminosity and low power consumption.

System power is provided by batteries, which are charged continuously by a diesel engine. The system can run continuously for more than a week without intervention or refueling, and the batteries continue to power the lights if the engine shuts down.

A weather-resistant enclosure houses the power system and has two side doors for easy access. A hinged top panel provides greater access when maintenance is required. The side doors may be opened while the maintenance panel is raised. An optional secondary-containment system protects against fluid leaks, spills, and drips.

Features and Benefits

  • Compact trailer is easy to maneuver
  • Torsion axle provides smooth ride and reduces stress on components
  • Cradles with locking pins hold display arms in place during transport
  • Heavy-duty hand-winch allows one person to easily raise and lower “X” assembly
  • Lock-pins hold the assembly in place during operation
  • Full deployment by one person takes less than five minutes
  • Fully enclosed steel equipment-bay protects controls, engine, and other components from the elements
  • Two gull-wing doors with handles and latches provide access to controls, fuel tank, engine, and electronics
  • Locking door handles protect equipment bay from unauthorized access
  • Control panel features elapsed hour meter, engine indicator lights, and brightness-selection switch
  • Manually activated high-power operating mode melts ice from lights
  • High-efficiency LED lights provide bright, highly directional light
  • Lights are instant-on and immediately at full intensity
  • Flashing front-facing lights are visible for miles, day or night, even in poor weather
  • Flashing rear-facing indicator lights allow operator to see the equipment is operating
Power system
  • Ultra-quiet industrial diesel engine, 3-cylinder and water-cooled
  • Energy-efficient operation results in extraordinarily long run times
  • Engine properly sized for low-wattage load of high-efficiency LED lights
  • Engine size prevents wet stacking, ensuring higher efficiency and no waste
  • Extra-large polypropylene fuel tank shows fuel-level at a glance, no need for fuel gauge
  • Fuel tank has wide filler neck for convenience
  • Automatic engine-shutdown system protects engine from damage due to low oil pressure and high coolant temperature
  • Batteries continue to power lights after engine fuel runs out
  • 50,000-hour LED lifespan reduces maintenance by virtually eliminating the need for replacement
  • Hinged maintenance panel provides unimpeded access to engine, generator and electrical components
  • Durable powder-coat finish resists the elements
  • Standard trailer tires
  • Heavy-duty bolt-on steel fenders can be replaced if damaged
  • Lighted visual indication of temporary closure of airport runway
  • Can also be used for airport taxiways


Temperature Limits (Operating)
  • 0 to 140°F (–18 to 60°C) on engine power
  • –40 to 140°F (–40 to 60°C) on shore power
  • Inquire about additional cold-weather options
Temperature Limits (Storage)
  • –40 to 185°F (–40 to 85°C)
Humidity Limits
  • Conformal coating rated to 95% relative humidity
Wind Load
  • Exceeds FAA requirements for minimum wind speed
Run Time
  • With engine, approximately 168 hours continuous operation on one tank of fuel
  • On batteries only, after engine shutdown, up to 24 hours depending on battery condition
Standards Certified for use at FAA-regulated airports in accordance with the following documents of the US Department of Transportation, Federal Aviation Administration:
  • FAA AC 150/5345-55A, “Specification for L-893, Lighted Visual Aid to Indicate Temporary Runway Closure”
  • FAA EB67D, “Light Sources Other Than Incandescent and Xenon For Airport and Obstruction Lighting Fixtures”
  • FAA AC 150/5345-53D, “Airport Lighting Equipment Certification Program”
  • FAA Addendum to AC 150/5345-53D

Crowd control barrier packaging options: assembled or disassembled?

Shipping disassembled - knocked-down (most popular).

Most barriers are packaged 2 in a box, when you receive the shipment you will have to twist the pole in to the base, instructions will be inside the box, usually no tools required.

Shipping assembled.

We can ship posts fully assembled in the factory, there is a small charge for it, but you don’t have to do anything else just unpack it at the location. A small portion of our barriers can only be shipped assembled.

  • Shipping cost to ship SMALL orders (up to 25 posts) assembled will be 2 to 3 times higher, because the box will become very large and carriers will charge so called “dimensional weight”. Example: to ship two 25 Lbs post disassembled posts in 1 box, the billable weight is 50 Lbs for both posts, to ship them assembled - each post will be boxed individually in a 42x15x15" box, each box actual weight is 26 Lbs, but the “dimensional” - billable weight is 57 Lbs each, or 114 Lbs.
  • Shipping cost to ship LARGE orders (25 or more assembled posts) will be virtually the same. Large heavy orders are being shipped using the most economical method - LTL, boxes are shipped on pallets, the dimensional weight is not applicable in this case. For more details click here


  • Large order shipping cost has to be calculated and quoted manually after you place your order.
  • We can always use your carrier to ship, the shipping charge from us will be $0, you will be charged by your carrier depending to your rates.

"Free Shipping" packaging options:

Products that are sold with “Free shipping” are shipped “Knocked-down”, if you select “Assembled” a shipping charge will be added in addition to the $9 packaging fee. If your order is for 25 post or more and ships LTL, no extra shipping is charged. For more packaging information click here<- Return to main page "Shipping-and-Returns"