Filters
Lead Apron Racks
Lead apron racks at BarrierHQ.com keep radiation garments hanging correctly between procedures — on the wall, on a rolling stand, or in a lockable mobile locker. This collection includes Phillips Safety Products peg racks, swing-arm and towel-bar wall racks, mobile valet and spyder racks, the Caddy Shield, a deluxe mobile locker, and replacement hangers and parts.
Read more
Wall-mounted, mobile and locker storage for lead aprons
Lead aprons last longer and stay ready for the next case when they hang open instead of folding over a chair or piling on a counter. BarrierHQ.com organizes the Phillips Safety Products rack line so purchasing can order a specific SKU: a one-peg hook for a private office, a ten-rod wall rack for a busy department, a vest-and-skirt mobile stand, or a lockable locker for controlled storage.
Wall-mounted racks
Wall models include peg racks from one to nine aprons, left- and right-swing rod and arm racks, full-swing five-arm storage, chrome apron-and-glove holders, and towel-bar style steel racks with or without glove hooks. A table-pad hook (TPR-H2) is included for pads that should also stay off the floor. Most wall racks ship as parcels; the longest bars are treated as freight.
Mobile racks and lockers
Floor-standing units roll a set of garments to the table. Choose an eight-peg spyder, a 24-, 36- or 48-inch valet with closed- or open-loop hangers, a ten-arm low-profile or garment-style rack, a vest-and-skirt mobile rack, the Caddy Shield single-apron carrier, or the deluxe mobile locker. These units ship by LTL freight.
Hangers and replacement parts
Closed-loop and open-loop chrome hangers, a blue metal open-loop hanger, the F5S skirt adapter, and SAR8G replacement spyder, glove, pole and base parts are listed individually so you can service a rack without replacing the entire stand.
Every item is manufactured by Phillips Safety Products and sold at BarrierHQ.com. Typical lead time is 1-2 weeks. We prepare written quotes, accept purchase orders, offer net terms to qualified organizations, and arrange parcel or freight shipment to your dock.
Wall Mounted Lead Apron Peg Rack, 1 Apron – RAR-P1
The RAR-P1 is a compact wall-mounted peg that keeps a single lead apron off chairs and counters in a tight exam or dental room. BarrierHQ.com suppl...
View full detailsWall Mounted Lead Apron Peg Rack, 2 Aprons – RAR-P2
The RAR-P2 is a 12-inch wall peg rack that holds two lead aprons side by side. It is a straightforward Phillips Safety Products hook rail for small...
View full detailsWall Mounted Lead Apron Peg Rack, 3 Aprons – RAR-P3
The RAR-P3 is the three-apron size in Phillips Safety Products' wall-mounted peg-rack family. At about 17 inches wide it gives a small radiology or...
View full detailsWall Mounted Lead Apron Peg Rack, 4 Aprons – RAR-P4
The RAR-P4 is a 19-inch wall-mounted peg rack that holds four lead aprons. It is a common mid-size choice for a general X-ray room, and BarrierHQ.c...
View full detailsWall Mounted Lead Apron Peg Rack, 7 Aprons – RAR-P7
The RAR-P7 is a 36-inch wall peg rack that holds seven lead aprons on one rail. It gives a busy imaging or cath department a single, organized hang...
View full detailsWall Mounted Lead Apron Peg Rack, 9 Aprons – RAR-P9
The RAR-P9 is the nine-apron wall peg rack in the Phillips Safety Products series, a 50-inch rail for departments that keep a full set of garments ...
View full detailsWall Mounted Apron Rack, 5 Swing Rods – Left Swing – RAR-500L
The RAR-500L is a wall-mounted apron rack with five swing rods that open to the left. It lets staff fan garments out for a quick grab and fold the ...
View full detailsWall Mounted Apron Rack, 5 Swing Rods – Right Swing – RAR-500R
The RAR-500R is the right-swing version of Phillips Safety Products' five-rod wall rack. Five rods open to the right so aprons can be fanned for se...
View full detailsWall Mounted Apron Rack, 10 Swing Rods – RAR-1000
The RAR-1000 is Phillips Safety Products' ten-swing-rod wall rack, built for departments that need a full row of lead aprons on one wall. BarrierHQ...
View full detailsWall Mounted Lead Apron Storage Rack, 5 Full Swing Arms – RAR-F5S
The RAR-F5S is a wall-mounted storage rack with five full-swing arms for lead aprons. The arms open wide for loading and close neatly against the w...
View full detailsFive-Arm Lead Apron Wall Rack – Left Swing – RAR-SA5-L
The RAR-SA5-L is a five-arm lead apron wall rack that swings to the left. It gives a compact room a hinged arm set without a floor base, and Barrie...
View full detailsFive-Arm Lead Apron Wall Rack – Right Swing – RAR-SA5-R
The RAR-SA5-R is the right-swing five-arm wall rack from Phillips Safety Products. Five arms hold lead aprons and fold back toward the wall, and Ba...
View full detailsWall Mounted Chrome Lead Apron and Glove Holder – RAR-820C
The RAR-820C is a wall-mounted chrome rack that holds a lead apron and gloves in one compact fixture. It is meant for a room that needs a dedicated...
View full detailsWall Mounted Steel Multi-Apron and Glove Rack, Two Bars, Four Glove Holders – RAR-821
The RAR-821 is a wall-mounted steel rack with two apron bars and four glove holders. It keeps several lead aprons and a set of gloves on one compac...
View full detailsWall Mounted Steel Apron Rack, Towel-Bar Style, No Glove Holders – RAR-AGR-105
The RAR-AGR-105 is the towel-bar style steel wall rack with no glove holders. Aprons drape over a single straight bar, which some departments prefe...
View full detailsWall Mounted Steel Apron Rack, Towel-Bar Style, Two Glove Holders – RAR-AGR-110
The RAR-AGR-110 adds two glove holders to Phillips Safety Products' towel-bar wall rack. Aprons drape on the bar while gloves hang at the ends, and...
View full detailsWall Mounted Steel Apron Rack, Towel-Bar Style, Four Glove Holders – RAR-AGR-115
The RAR-AGR-115 is the towel-bar wall rack with four glove holders, the highest glove count in this Phillips Safety Products family. BarrierHQ.com ...
View full detailsTable Pad Storage Rack – TPR-H2
The TPR-H2 is a wall-mounted storage rack for imaging table pads, not a lead-apron peg. It keeps pads off the floor and off the table surface betwe...
View full details8-Peg Spyder Mobile Leaded Apron Rack – RAR-SAR8
The RAR-SAR8 is an eight-peg mobile spyder rack for lead aprons. Pegs radiate from a center pole on a rolling base so a room can move a set of garm...
View full details8-Peg Spyder Mobile Leaded Apron Rack with Glove Rack – RAR-SAR8G
The RAR-SAR8G adds a glove rack to the eight-peg mobile spyder. It stands about 51.125 inches tall with a 26.325-inch rack diameter and a 28-inch c...
View full detailsMobile Radiation Apron Valet Rack, 24" Wide, 5 Closed Loop Hangers – RAR-MAR24
The RAR-MAR24 is a 24-inch-wide mobile valet rack that comes with five closed-loop hangers. It stands 58 inches tall on a 24-inch-deep rolling base...
View full detailsMobile Radiation Apron Valet Rack, 24" Wide, 5 Open Looped Hangers – RAR-MAR24-OPEN
The RAR-MAR24-OPEN is a 24-inch-wide mobile valet rack that comes with five open-loop hangers. It stands 58 inches tall on a 24-inch-deep rolling b...
View full detailsMobile Radiation Apron Valet Rack, 36" Wide, 5 Closed Loop Hangers – RAR-MAR36
The RAR-MAR36 is a 36-inch-wide mobile valet rack that comes with five closed-loop hangers. It stands 58 inches tall on a 24-inch-deep rolling base...
View full detailsMobile Radiation Apron Valet Rack, 36" Wide, 5 Open Looped Hangers – RAR-MAR36-OPEN
The RAR-MAR36-OPEN is a 36-inch-wide mobile valet rack that comes with five open-loop hangers. It stands 58 inches tall on a 24-inch-deep rolling b...
View full detailsMobile Radiation Apron Valet Rack, 48" Wide, 5 Closed Loop Hangers – RAR-MAR48
The RAR-MAR48 is a 48-inch-wide mobile valet rack that comes with five closed-loop hangers. It stands 58 inches tall on a 24-inch-deep rolling base...
View full detailsMobile Radiation Apron Valet Rack, 48" Wide, 5 Open Looped Hangers – RAR-MAR48-OPEN
The RAR-MAR48-OPEN is a 48-inch-wide mobile valet rack that comes with five open-loop hangers. It stands 58 inches tall on a 24-inch-deep rolling b...
View full detailsMobile Multiple Apron Hanger, 10 Swing Arms, Low-Profile Wheels – RAR-M10S-HB
The RAR-M10S-HB is a mobile ten-swing-arm apron hanger on low-profile wheels. It is built for departments that need to roll a large set of lead apr...
View full detailsVest and Skirt Mobile Rack – RAR-MVSR5
The RAR-MVSR5 is a mobile rack designed for vest-and-skirt lead apron sets rather than single-piece fronts. It stands about 72 inches tall on a 25....
View full detailsGarment-Style 10-Arm Mobile Apron Rack – RAR-MSA10
The RAR-MSA10 is a garment-style mobile apron rack with ten arms, built like a rolling wardrobe for lead garments. Official Phillips dimensions are...
View full detailsCaddy Shield Mobile Apron Carrier – RAR-CADDY
The Caddy Shield (RAR-CADDY) is a rolling carrier designed so a lead apron drapes over a purpose-built hanger while the frame stands behind the gar...
View full detailsDeluxe Mobile Lead Apron Locker – RAR-MLOCKER5
The RAR-MLOCKER5 is a deluxe mobile lead apron locker: a lockable, rolling cabinet for departments that want garments secured and out of the open w...
View full detailsClosed-Loop Chrome Lead Apron Hanger – RAR-CLHANGER
The RAR-CLHANGER is a closed-loop chrome wire hanger for lead aprons. The closed loop stays on the bar, which is useful on valet racks and anywhere...
View full detailsOpen-Loop Chrome Lead Apron Hanger – RAR-OLHANGER
The RAR-OLHANGER is an open-loop chrome wire hanger for lead aprons. Official Phillips dimensions are 21 5/8 inches wide by 9 3/4 inches high, with...
View full detailsMetal-Constructed Open-Loop Apron Hanger, Blue – RAR-MCHANGER
The RAR-MCHANGER is a blue, metal-constructed open-loop hanger for lead aprons. It is a sturdier-looking alternative to the chrome wire hangers and...
View full detailsSkirt Auxiliary Hanger, F5S Apron Rack Adapter – RAR-F5S-ADPT
The RAR-F5S-ADPT is a skirt auxiliary hanger that attaches to the RAR-F5S wall rack so a vest-and-skirt set can hang together on one arm. BarrierHQ...
View full details8-Arm Spyder Rack Replacement for RAR-SAR8G – RAR-SAR8G-SRACK
The RAR-SAR8G-SRACK is the eight-arm spyder rack replacement used on the RAR-SAR8G mobile stand. It is a service part, not a complete rack, and Bar...
View full detailsGlove Rack Replacement for RAR-SAR8G – RAR-SAR8G-GLOVE
The RAR-SAR8G-GLOVE is the replacement glove rack for the RAR-SAR8G mobile spyder. BarrierHQ.com offers this Phillips Safety Products part for serv...
View full detailsPole Replacement for RAR-SAR8G – RAR-SAR8G-POLE
The RAR-SAR8G-POLE is the replacement center pole for the RAR-SAR8G mobile spyder rack. BarrierHQ.com lists this Phillips Safety Products service p...
View full detailsCastered Base Replacement for RAR-SAR8G – RAR-SAR8G-BASE
The RAR-SAR8G-BASE is the replacement base with five casters for the RAR-SAR8G mobile spyder. The parent rack uses a 28-inch-diameter base, and Bar...
View full details