Ordering & Shipping Information
Bolt and nut hardware included. A standard swing or pedestrian gate uses 2 hinges.
Product Description
Hang a gate on your temporary fence line with the ANTCORE-HN Gate Hinge. The hinge has two halves: one clamps to the fence panel's end post and the other to the gate frame. A pin on one half drops into the sleeve on the other, so the gate pivots on the pin. Each half bolts around the frame tube, so nothing has to be welded or drilled.
Made from hot-dip galvanized steel, the hinge stands up to rain, mud and repeated installs on job sites, events and rental fleets.
How It Works
-
Position the gate. Set the gate panel next to the fence panel it will swing from.
-
Clamp the halves. Bolt one half to the fence panel tube and the other half to the gate frame tube.
-
Join the pin. Lower the gate so the pin seats in the sleeve.
-
Tighten and test. Tighten the nuts and swing the gate to check it moves freely.
Specifications
| Product code |
ANTCORE-HN |
| Material |
Hot-dip galvanized steel |
| Finish |
Galvanized |
| Hardware |
Bolt & nut included |
| Installation |
Bolt-on, no welding |
| Use |
Temporary fence swing and pedestrian gates |
What's Included
ANTCORE gate hinge with bolt and nut hardware.
Sold separately: gate panels, fence panels, ANTCORE-WH gate wheel, and ANTCORE-STAND tube stands.
