Download Spec-SheetIntroducing one of our most advanced hazard lights yet—the Type A/C Solar-Powered Bi-Directional Barricade Light (BDL). Redesigned with cutting-edge battery and solar panel technology, this light features a sleek new profile while maintaining superior performance. Easy to install and exceeding industry standards, it’s the ideal solution for your safety needs.
Like all OTW hazard lights, the Bi-Directional Barricade Light includes a simple momentary switch for effortless control and a built-in dusk-to-dawn light sensor. Its enhanced battery life and electrical design ensure over 120 hours of operation in auto-flashing mode (Type A) and over 72 hours in auto steady-burn mode (Type C). The factory-installed rechargeable battery pack allows for maintenance-free use, providing a reliable lighting solution for construction sites. Available in amber/yellow or red.
Features & Benefits
-
3-Way Switch: Auto Flashing, Auto Steady, Off
- 1st Press: Auto Flashing *
- 2nd Press: Auto Steady *
* Light activates automatically in low-light conditions - 3rd Press: OFF
- High-efficiency solar panel
- Preinstalled NiMH rechargeable batteries
- Over 730 recharging cycles
- Full battery charge supports:
- 120+ hours in Flashing mode
- 72+ hours in Steady mode
- Operating temperature: -20°F to +150°F (-29°C to +65°C)
- Water and dust resistant (IP65 standard)
- Includes:
- Mounting bolts (3.5″/90mm & 5.5″/140mm)
- Mounting bolt spacers
- Wire switch key
- Anti-rotation bracket
Hazard Light Output
- Type A Luminous Intensity: 4.0 candela (Yellow) / 1.0 candela (Red)
- Type C Luminous Intensity: 2.0 candela (Yellow & Red)
- Flash Rate: 65 per minute
- Visible Distance: Up to 900m (3,000 ft) on a clear night
Compatible With
- OTW32x45
- OTW42x72 * (Requires mounting bolt spacer)
- Most A-Frames ** (Requires anti-rotation bracket)
- Most Vertical Panels
- Most Traffic Delineators
- Most Traffic Drums
Government/Industry Standards
- Meets or exceeds UDOT Standards
- Meets or exceeds MUTCD Requirements
- Meets or exceeds ITE Specifications
Crowd control barrier packaging options: assembled or disassembled?
Shipping disassembled - knocked-down (most popular).
Most barriers are packaged 2 in a box, when you receive the shipment you will have to twist the pole in to the base, instructions will be inside the box, usually no tools required.
Shipping assembled.
We can ship posts fully assembled in the factory, there is a small charge for it, but you don’t have to do anything else just unpack it at the location. A small portion of our barriers can only be shipped assembled.
- Shipping cost to ship SMALL orders (up to 25 posts) assembled will be 2 to 3 times higher, because the box will become very large and carriers will charge so called “dimensional weight”. Example: to ship two 25 Lbs post disassembled posts in 1 box, the billable weight is 50 Lbs for both posts, to ship them assembled - each post will be boxed individually in a 42x15x15" box, each box actual weight is 26 Lbs, but the “dimensional” - billable weight is 57 Lbs each, or 114 Lbs.
- Shipping cost to ship LARGE orders (25 or more assembled posts) will be virtually the same. Large heavy orders are being shipped using the most economical method - LTL, boxes are shipped on pallets, the dimensional weight is not applicable in this case. For more details click here
Notes:
- Large order shipping cost has to be calculated and quoted manually after you place your order.
- We can always use your carrier to ship, the shipping charge from us will be $0, you will be charged by your carrier depending to your rates.
"Free Shipping" packaging options:
Products that are sold with “Free shipping” are shipped “Knocked-down”, if you select “Assembled” a shipping charge will be added in addition to the $9 packaging fee. If your order is for 25 post or more and ships LTL, no extra shipping is charged. For more packaging information click here<- Return to main page "Shipping-and-Returns"